A transparent 2026 price guide for our most popular epoxy floor systems — diamond-ground prep and a 7-year written warranty included on every job.
Call 0477 533 479 — Free QuoteWondering how much epoxy flooring costs in Perth? Honest answer: it depends on the size of your slab, the condition of the concrete and the finish you choose — but you deserve real numbers, not "contact us for pricing". Below is a transparent price guide for our most popular residential and light-commercial epoxy floor systems, all professionally diamond-ground and backed by a 7-year written warranty.
| System | From (per m²) | Best for | What you get |
|---|---|---|---|
| Solid Colour | A$65/m² | Budget-friendly, clean single-colour finish | Supply & install, diamond-ground prep included |
| Premium FlakeMost popular | A$75/m² | Garages, workshops, living spaces | Decorative flake broadcast + polyurethane topcoat |
| Metallic | A$95/m² | Showroom / feature floors | Premium metallic finish |
Prices are starting points for supply & install and are + GST. Final pricing depends on slab condition and the preparation required — every quote is free and fixed in writing before any work starts.
Every Total Epoxy Care floor is a complete system — not just a coat of paint. Each price above includes:
We mechanically grind the slab so the coating bonds into the concrete, not on top of it. This is the #1 reason our floors don't peel.
Cracks and pits are filled, then an industrial-grade primer is applied for maximum adhesion.
A high-build, industrial-grade resin base coat goes down as the foundation of the system.
On flake systems, decorative flake is broadcast to full rejection for even, total coverage.
A tough polyurethane/polyaspartic topcoat seals the floor for chemical, UV and abrasion resistance.
Every floor we install is covered in writing against peeling, delamination and adhesion failure.
No two slabs are identical, so a fixed written quote is always based on your actual floor. The main factors are:
Want to see how this applies to a specific space? Explore our garage epoxy flooring in Perth, workshop & warehouse and patio & outdoor pages.
Epoxy flooring in Perth starts from A$65/m² for a solid colour finish, A$75/m² for our most popular Premium Flake system, and A$95/m² for metallic finishes (all prices + GST, supply and install with diamond-ground prep included). A typical 40 m² double garage starts from A$2,800 fully installed. Every quote is free and fixed in writing.
Yes. A professionally installed epoxy floor seals porous concrete, stops dusting, resists oil and chemicals, wipes clean in seconds and adds a hard, attractive, high-gloss surface. Because it's diamond-ground and sealed properly, it typically lasts far longer than cheap roll-on coatings — making it one of the best-value upgrades per square metre for a garage, workshop or patio.
A professionally diamond-ground and sealed epoxy floor typically lasts 10–20 years with normal use. Total Epoxy Care backs every installation with a 7-year written warranty covering peeling, delamination and adhesion failure.
Very cheap quotes usually skip proper preparation — acid etching or no grinding at all — which is the #1 cause of epoxy failure. We mechanically diamond-grind every slab so the coating bonds into the concrete. Proper prep costs more up front but is why our floors don't peel.
No. All quotes are free and no-obligation, with the price fixed in writing before any work starts.
Locally owned, Perth-based, and backed by a 7-year written warranty. Get a free, no-obligation quote with pricing fixed in writing before we start.
Call 0477 533 479